Type 65 operable wall in a meeting room, with a pass door opened into an adjoining office

Home / Products / Type 65

Solid operable wall · 2–3.8 m

Type 65 operable partition

A compact top-hung series for meeting rooms and lower ceiling heights, with magnetic vertical seals, U-type or L-type pass doors, and 32–36 dB catalog ratings.

Request a project quote WhatsApp +86 139 2506 0326

Where this series is used

Type 65 is the everyday series for conference rooms and other mid-height openings. The standard melamine panel is 65 mm thick; hard-wrapped and soft-wrapped builds run up to 95 mm. The catalog specifies partition heights of 2 to 3.8 metres, a top-hung Type 65 track, and 22.5 mm of top and bottom seal travel.

  • Recommended height. 2–3.8 m
  • Panel thickness. 65 mm standard; up to 95 mm in wrapped builds
  • Panel width. 600–1,220 mm
  • Top / bottom seal travel. 22.5 mm
  • Pass doors. U-type and L-type door-in-door
  • Vertical joints. Magnetic-strip interlock
Type 65 operable wall in a meeting room, with a pass door opened into an adjoining office

Specification table

Models, as printed in the catalog

Figures below are taken from the July 2024 specification table. Width is the panel width. Height is the table range in millimetres. Sound insulation is the catalog figure in dB.

Model Thickness (mm) Width (mm) Height (mm) Sound (dB) Seal travel (mm) Face Weight (kg/m²)
65xcds65600–1,2202,000–3,8003222.5Melamine25
65xcdy65–95600–1,2202,000–3,80032–3522.5Hard wrap25–30
65xcdr95600–1,2202,000–3,8003622.5Soft wrap30

Track load and other catalog notes

The Type 65 product page states a maximum track load of 225 kg per panel. The components table at the back of the catalog lists a Type 65 track capacity of 225 kg per metre. We show both wordings because the catalog uses two different units.

Construction

Base layers listed for this series

The catalog quotes a sound-insulation coefficient (RW) and a density for each base-layer option. Densities are printed in kg/m², and are shown here as listed.

Base layerRWListed density
Color steelRW 36 dB30 kg/m²
Medium-density fiberboard or plywoodRW 32 dB24 kg/m²
Glass-magnesium boardRW 26 dB25 kg/m²

Panels can be built as a single leaf or as a double-leaf arrangement, and can take a U-type or L-type pass door so the room remains accessible after the wall is closed.

Type 65 panel section, showing the top-hung trolley, seals, and internal frame
Type 65 panel section, showing the top-hung trolley, seals, and internal frame

Hardware

Track and trolleys for Type 65

Type 65 straight track
Type 65 straight track
Type 65 single trolley
Type 65 single trolley
Type 65 running track
Type 65 running track
Type 65 double trolley
Type 65 double trolley

Faces and finishes

Every series is offered in the three faces used in the catalog. The model suffix tells you which face you are looking at.

  • Melamine (catalog suffix xcds). A factory-laminated decorative face. The components pages list black walnut, white oak, and sapele among the standard woods, with other colours available to the project. Melamine is the usual choice when the wall should match a typical interior door or wall finish and needs to be easy to clean.
  • Hard wrap (catalog suffix xcdy). Fabric or leather applied over a firm substrate. The face is taut rather than padded, and is often specified in hotels and boardrooms that want a tailored textile or leather look. In each series the hard-wrap build is also the mid-range acoustic option.
  • Soft wrap (catalog suffix xcdr). A padded fabric or leather face. It is the most tactile of the three finishes and, in every series, the catalog’s highest acoustic build, with the thickest panel and the highest listed weight.

Custom artwork, moulded faces, and two-tone builds appear in the project photographs and can be discussed with the quotation.

On site

Project photographs

Typical applications: Conference rooms, Training rooms, Offices.

Project inquiry

Send the opening size

Include the clear height and width, the stacking side if you know it, and any acoustic rating in the specification. If you already know you need Type 65, that is pre-selected below.

Alan@dayinacoustics.com

WhatsApp +86 139 2506 0326

Request a project quote

Required fields are marked. Submit the form and we will reply to the email you give us. You can also write to Alan@dayinacoustics.com or message us on WhatsApp +86 139 2506 0326.

Thank you. Your inquiry has been sent to Alan@dayinacoustics.com. We will come back to you as soon as we can. A copy is below if you want to keep it.


    
  

We use this information only to respond to your project inquiry. See the privacy policy.

WhatsApp Request a quote