Where this series is used
Type 80 / 85 is presented in the catalog as a single series. The standard melamine panel is 80 mm thick; hard-wrapped builds are 80–110 mm and soft-wrapped builds are 110 mm. Recommended partition height is 2 to 6 metres. Sound ratings in the specification table run from 36 dB (melamine) to 42 dB (soft wrap). Vertical joints use a magnetic-strip interlock, and U-type or L-type pass doors can be fitted.
- Recommended height. 2–6 m
- Panel thickness. 80 mm standard; up to 110 mm in wrapped builds
- Panel width. 600–1,220 mm
- Top / bottom seal travel. 22.5 mm
- Pass doors. U-type and L-type door-in-door
- Vertical joints. Magnetic-strip interlock
Specification table
Models, as printed in the catalog
Figures below are taken from the July 2024 specification table. Width is the panel width. Height is the table range in millimetres. Sound insulation is the catalog figure in dB.
| Model | Thickness (mm) | Width (mm) | Height (mm) | Sound (dB) | Seal travel (mm) | Face | Weight (kg/m²) |
|---|---|---|---|---|---|---|---|
| 80xcds | 80 | 600–1,220 | 2,000–6,000 | 36 | 22.5 | Melamine | 28 |
| 80xcdy | 80–110 | 600–1,220 | 2,000–6,000 | 36–40 | 22.5 | Hard wrap | 28–32 |
| 80xcdr | 110 | 600–1,220 | 2,000–6,000 | 42 | 22.5 | Soft wrap | 35 |
Track load and other catalog notes
The Type 80 / 85 product page uses the same load wording as the smaller series: a maximum track load of 225 kg per panel. The components table at the back of the catalog disagrees, and lists 450 kg per metre for Type 80 and 525 kg per metre for Type 85. We do not silently average or “correct” these figures. Please treat them as two catalog statements and confirm the required track capacity against your opening, panel weight, and stacking layout at quotation stage.
Construction
Base layers listed for this series
The catalog quotes a sound-insulation coefficient (RW) and a density for each base-layer option. Densities are printed in kg/m², and are shown here as listed.
| Base layer | RW | Listed density |
|---|---|---|
| Color steel | RW 50 dB | 40 kg/m² |
| Medium-density fiberboard or plywood | RW 40 dB | 32 kg/m² |
| Glass-magnesium board | RW 35 dB | 33 kg/m² |
Panels can be built as a single leaf or as a double-leaf arrangement, and can take a U-type or L-type pass door so the room remains accessible after the wall is closed.
Hardware
Track and trolleys for Type 80 / 85
Faces and finishes
Every series is offered in the three faces used in the catalog. The model suffix tells you which face you are looking at.
- Melamine (catalog suffix xcds). A factory-laminated decorative face. The components pages list black walnut, white oak, and sapele among the standard woods, with other colours available to the project. Melamine is the usual choice when the wall should match a typical interior door or wall finish and needs to be easy to clean.
- Hard wrap (catalog suffix xcdy). Fabric or leather applied over a firm substrate. The face is taut rather than padded, and is often specified in hotels and boardrooms that want a tailored textile or leather look. In each series the hard-wrap build is also the mid-range acoustic option.
- Soft wrap (catalog suffix xcdr). A padded fabric or leather face. It is the most tactile of the three finishes and, in every series, the catalog’s highest acoustic build, with the thickest panel and the highest listed weight.
Custom artwork, moulded faces, and two-tone builds appear in the project photographs and can be discussed with the quotation.
On site
Project photographs
Typical applications: Conference rooms, Banquet rooms, Multi-function halls.
Related series
Other walls in the range
Type 75 operable partition
Hotel interiors, multi-purpose rooms, and conference suites up to about 4.5 m high.
View series
Type 100 operable partition
Banquet halls, large conference rooms, and multi-function halls 5–8 m high.
View series
Super-high operable partition
Hotels, banquet halls, and multi-function halls. The body text cites 9–17 m; the table cites 7–13 m.
View seriesProject inquiry
Send the opening size
Include the clear height and width, the stacking side if you know it, and any acoustic rating in the specification. If you already know you need Type 80 / 85, that is pre-selected below.